One idea has came into my my mind to make another type of gravity engine.
If you take a ball up through straight vertical and let it come downward through semicircle with the centre of circumference of semicircle,being slightly extended as a slightly sharp more outward corner,gravitational work done to let ball slide along the curved path is more than work supplied to lift up ball in upward vertical direction.
We can somehow use this principle to make a real Gravity engine.
And also note that more gravity is directly used in a curved downward path than going against gravity in a upper vertical path,and hence this principle is not a Perpetual Motion Machine concept.
Defination of Perpetaul Moion Machine:
Perpetual motion describes hypothetical machines that produce more work or energy than they consume, whether they might operate indefinitely or not.
See gravity points on floor line are like arrays and when heavy ball moves over the half semicircle the ball slides over horrizontal axis two times once right to left circumferential centre and then left circumferential centre to right downwards due to gravity.
Then ball is taken upward through vertical straight on right by supplying some energy.
This is how we can make gravity engine to work with heavy balls.
If the semicircle is stretched outwards from circumferential centre,you will be able to recover energy supplied from centre of circumference to downward floor motion and you will convert gravity to usable output from top most ball position to centre of circumference.
For efficiency,it is better if the semicircle is stretched outwards.A proper shape of curve ,similar to triangle with curved corners is necessary.
It is a common sense that for more distance to be covered you need more energy.For less distance to be covered,you need less energy.Vertical distance is straight and needs less energy to be supplied to lift heavy ball.(Remember that ball should be lifted in a straight path and it should not be lifted along a parabolic like curve)
The curve streched semicircular distance is much greater than Vertical straight distance.So more gravitational energy is needed to displace weight over more distance.
This is no way a perpetual motion machine But it converts Gravitational energy into Electrical energy.A Perpectual motion machine is not a energy converter but a new energy creator which is Impossible.
Note:
1)This is a gravity engine idea basic principle but this is not a gravity wheel.Hence,we need to device a system in which ball can be slided over rails/paths as well as we need to devise a system to convert sliding movement of ball into electricity.This is therefore complex.
2)This is just an idea,not an engine structure.
It is not necessary that all gravity engines are a single big gravity wheels without other equipments.
If you take a ball up through straight vertical and let it come downward through semicircle with the centre of circumference of semicircle,being slightly extended as a slightly sharp more outward corner,gravitational work done to let ball slide along the curved path is more than work supplied to lift up ball in upward vertical direction.
We can somehow use this principle to make a real Gravity engine.
And also note that more gravity is directly used in a curved downward path than going against gravity in a upper vertical path,and hence this principle is not a Perpetual Motion Machine concept.
Defination of Perpetaul Moion Machine:
Perpetual motion describes hypothetical machines that produce more work or energy than they consume, whether they might operate indefinitely or not.
See gravity points on floor line are like arrays and when heavy ball moves over the half semicircle the ball slides over horrizontal axis two times once right to left circumferential centre and then left circumferential centre to right downwards due to gravity.
Then ball is taken upward through vertical straight on right by supplying some energy.
This is how we can make gravity engine to work with heavy balls.
If the semicircle is stretched outwards from circumferential centre,you will be able to recover energy supplied from centre of circumference to downward floor motion and you will convert gravity to usable output from top most ball position to centre of circumference.
For efficiency,it is better if the semicircle is stretched outwards.A proper shape of curve ,similar to triangle with curved corners is necessary.
It is a common sense that for more distance to be covered you need more energy.For less distance to be covered,you need less energy.Vertical distance is straight and needs less energy to be supplied to lift heavy ball.(Remember that ball should be lifted in a straight path and it should not be lifted along a parabolic like curve)
The curve streched semicircular distance is much greater than Vertical straight distance.So more gravitational energy is needed to displace weight over more distance.
This is no way a perpetual motion machine But it converts Gravitational energy into Electrical energy.A Perpectual motion machine is not a energy converter but a new energy creator which is Impossible.
Note:
1)This is a gravity engine idea basic principle but this is not a gravity wheel.Hence,we need to device a system in which ball can be slided over rails/paths as well as we need to devise a system to convert sliding movement of ball into electricity.This is therefore complex.
2)This is just an idea,not an engine structure.
It is not necessary that all gravity engines are a single big gravity wheels without other equipments.
Last edited: